ABB ProcessMaster User Manual

Parameter overview
62 - EN FEX300, FEX500 CI/FEX300/FEX500-EN
DO2 Alarm Config
General Alarm,
Min. Flowrate Alarm,
Max. Flowrate Alarm,
Empty Pipe
TFE
Gas Bubble
Conductivity
Coating
Sensor Temp
DO2 Action
Normally Open,
Normally Closed
Pulse Setup
Pulse Mode
Pulses per Unit
Pulse Width
Limit Frequency
Fullscale Frequency
Digital Input Setup
No Function,
Totalizer Reset(All),
Flowrate to Zero,
System Zero Adjust,
Totalizer Stop(All)
Dual Range
Start/Stop Batching
Current Output Iout at Alarm
High Alarm,
Low Alarm
Low Alarm Value
High Alarm Value
Iout at EP Alarm
Iout at Flow >103%
Iout at TFE Alarm
Iout Mode
italics = Parameter can only be changed at the "advanced" password level.

ABB ProcessMaster Specifications

General

Type	Electromagnetic Flowmeter
Liner Material	PTFE, PFA, Polyurethane, Rubber
Electrode Material	Stainless steel, Hastelloy, Tantalum, Titanium, Platinum
Process Connection	Flange, Wafer
Fluid Temperature	-40 to 180 °C (-40 to 356 °F) Depending on liner
Output	4-20 mA, HART, PROFIBUS PA, FOUNDATION Fieldbus
Power Supply	100 to 230 V AC, 24 V AC/DC
Protection Class	IP67
Approvals	ATEX, IECEx, FM, CSA