ABB ProcessMaster User Manual

Parameter overview
66 - EN FEX300, FEX500 CI/FEX300/FEX500-EN
Trend
Conductivity
Electrode Coat. QE1
Electrode Coat. QE2
Logtime Interval
Trend-Logging
Flowrate Alarm
Max. Flowrate Alarm
Min. Flowrate Alarm
Simulation Mode
Off, Flow Simulation,
Q [Unit],
Q [%],
CurrentOut,
Pulse on DO1,
Pulse on DO2,
Logic on DO1,
Logic on DO2,
HART Freq,
Digital input
Output Readings
Current
DO1 Frequency
DO1 State
Digital In State
Totalizer
9
Reset Vol. Totals
Totalizer Fwd
Totalizer Rev
Totalizer Net
All Vol. Totalizer
Batching
Damping
Preset Batch Tot.
Lag Corr. Mode
Lag Corr. Quantity
Batch Tot.
Total Batch Counter
Reset Batch Counter
Start/Stop Batching
Edit Vol. Totals
Edit Totalizer Fwd
Edit Totalizer Rev
Edit Totalizer Net
italics = Parameter can only be changed at the "advanced" password level.

ABB ProcessMaster Specifications

General

Type	Electromagnetic Flowmeter
Liner Material	PTFE, PFA, Polyurethane, Rubber
Electrode Material	Stainless steel, Hastelloy, Tantalum, Titanium, Platinum
Process Connection	Flange, Wafer
Fluid Temperature	-40 to 180 °C (-40 to 356 °F) Depending on liner
Output	4-20 mA, HART, PROFIBUS PA, FOUNDATION Fieldbus
Power Supply	100 to 230 V AC, 24 V AC/DC
Protection Class	IP67
Approvals	ATEX, IECEx, FM, CSA