ABB REC650 - Application

Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Settable timer function block TIMERSETQT - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
ANDQT function block ANDQT - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Set/reset logic component SRMEMORYQT - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Reset/set logic component RSMEMORYQT - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
INVALIDQT function block INVALIDQT - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Single indication signal combining
function block
INDCOMBSPQT - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Single indication signal extractor
function block
INDEXTSPQT - -
11.3.2 Application
A set of standard logic blocks, like AND, OR etc, and timers are available for adapting the
IED configuration to the specific application needs. Additional logic blocks that, beside
the normal logical function, have the capability to propagate timestamp and quality are
also available. Those blocks have a designation including the letters QT, like ANDQT,
ORQT etc.
Section 11 1MRK 511 286-UUS A
Logic
274
Application manual