GUID-D71BA06D-3769-4ACB-8A32-5D02EA473326 V1 EN
Figure 29: RJ-45 communication port and green indicator LED
1 RJ-45 connector
2 Green indicator LED
When a computer is connected to the IED front port with a crossed-over cable, the IED's
DHCP server for the front interface assigns an IP address to the computer if DHCPServer
= Enabled. The default IP address for the front port is 10.1.150.3.
Do not connect the IED front port to a LAN. Connect only a single local
PC with PCM600 to the front port.
5.1.4.4 Single-line diagram
Single-line diagram is used for bay monitoring and/or control. It shows a graphical
presentation of the bay which is configured with PCM600.
Section 5 1MRK 511 286-UUS A
Local human-machine interface
84
Application manual
To Next Page
Loading...
