ABB relion REF615 - 2.1.1 Product version history

2.1.1 Product version history
Product version Product history
1.0 Product released
1.1 • IRIG-B
• Support for parallel protocols added: IEC 61850 and Modbus
• X130 BIO added: optional for variants B and D
• CB interlocking functionality enhanced
• TCS functionality in HW enhanced
• Non-volatile memory added
2.0
• Support for DNP3 serial or TCP/IP
• Support for IEC 60870-5-103
• Voltage measurement and protection
• Power and energy measurement
• New standard configurations E and F
• Disturbance recorder upload via WHMI
• Fuse failure supervision
3.0
• New configurations G and H
• Additions to configurations A, B, E and F
• Application configurability support
• Analog GOOSE support
• Large display with single line diagram
• Enhanced mechanical design
• Increased maximum amount of events and fault records
• Admittance-based earth-fault protection
• Frequency measurement and protection
• Synchronism and energizing check
• Combi sensor inputs
• Multi-port Ethernet option
4.0 • New configuration J
• Additions/changes for configurations A-H
• Dual fiber optic Ethernet communication option (COM0032)
• Generic control point (SPCGGIO) function blocks
• Additional logic blocks
• Button object for SLD
• Controllable disconnector and earth switch objects for SLD
• Wattmetric based E/F
• Harmonics based E/F
• Power Quality functions
• Increased maximum amount of events and fault records
Table continues on next page
Section 2 1MRS756378 S
REF615 overview
18 REF615
Application Manual