ABB relion REF615 - Default Disturbance Recorder Settings

LED Description
7 Disturbance recorder triggered
8 High impedance restricted earth-fault protection operated
9 Circuit breaker condition monitoring or supervision alarm
10 Arc fault detected
11 Autoreclose in progress
3.12.2.2 Default disturbance recorder settings
Table 59: Default disturbance recorder analog channels
Channel Description
1 IL1
2 IL2
3 IL3
4 Io
5 IoB
6 Uo
7 U1
8 U2
9 U3
10 U1B
11 -
12 -
Table 60: Default disturbance recorder binary channels
Channel
ID text Level trigger mode
1 PHLPTOC1 - start Positive or Rising
2 PHHPTOC1 - start Positive or Rising
3 PHIPTOC1 - start Positive or Rising
4 DPHLPDOC1 - start Positive or Rising
5 DPHHPDOC1 - start Positive or Rising
6 NSPTOC1 - start Positive or Rising
7 NSPTOC2 - start Positive or Rising
8 EFLPTOC1 - start Positive or Rising
9 EFLPTOC2 - start Positive or Rising
10 EFHPTOC1 - start Positive or Rising
11 EFIPTOC1 - start Positive or Rising
12 DEFLPDEF1 - start Positive or Rising
13 DEFHPDEF1 - start Positive or Rising
14 T1PTTR1 - start Positive or Rising
Table continues on next page
1MRS756378 S Section 3
REF615 standard configurations
REF615 293
Application Manual