Table 88: Light sensor input connectors
Terminal Description
X13 Input Light sensor 1
X14 Input Light sensor 2
X15 Input Light sensor 3
5.1.5 RTD/mA inputs
It is possible to connect mA and RTD based measurement sensors to the IED if the
IED is provided with optional RTD0001 module in standard configurations A and B
and with AIM0003 module in standard configurations E, F, H, J and N.
Table 89: Optional RTD/mA inputs with RTD0001 module
Terminal Description
X130:1 mA1 (AI1), +
X130:2 mA1 (AI1), -
X130:3 mA2 (AI2), +
X130:4 mA2 (AI2), -
X130:5 RTD1 (AI3), +
X130:6 RTD1 (AI3), -
X130:7 RTD2 (AI4), +
X130:8 RTD2 (AI4), -
X130:9 RTD3 (AI5), +
X130:10 RTD3 (AI5), -
X130:11 Common
1)
X130:12 Common
2)
X130:13 RTD4 (AI6), +
X130:14 RTD4 (AI6), -
X130:15 RTD5 (AI7), +
X130:16 RTD5 (AI7), -
X130:17 RTD6 (AI8), +
X130:18 RTD6 (AI8), -
1) Common ground for RTD channels 1-3
2) Common ground for RTD channels 4-6
Table 90: Optional RTD/mA inputs with AIM0003 module
Terminal
Description
X130:1 mA 1 (AI1), +
X130:2 mA 1 (AI1), -
X130:3 RTD1 (AI2), +
X130:4 RTD1 (AI2), -
Table continues on next page
Section 5 1MRS756378 S
IED physical connections
388 REF615
Application Manual
To Next Page
Loading...
