ABB relion REF615 - Page 371

OR6
B1
B2
B3
B4
B5
B6
O
OR6
B1
B2
B3
B4
B5
B6
O
OR6
B1
B2
B3
B4
B5
B6
O
OR6
B1
B2
B3
B4
B5
B6
O
OR6
B1
B2
B3
B4
B5
B6
O
OR6
B1
B2
B3
B4
B5
B6
O
TPGAPC1
IN1
IN2
OUT1
OUT2
OR6
B1
B2
B3
B4
B5
B6
O
GENERAL_START_PULSE
GENERAL_OPERATE_PULSE
PHIPTOC1_OPERATE
PHLPTOC1_OPERATE
PHHPTOC1_OPERATE
NSPTOC1_O PERATE
PHLPTOC2_OPERATE
NSPTOC2_O PERATE
EFLPTOC1_OPERATE
EFHPTOC1_OPERATE
EFIPTOC1_OPERATE
EFLPTOC2_OPERATE
PDNSPTOC1_OPERATE
ARCSARC1_OPERATE
ARCSARC2_OPERATE
ARCSARC3_OPERATE
PHLPTOC1_START
PHHPTOC1_START
PHLPTOC2_START
PHIPTOC1_START
NSPTOC1_START
NSPTOC2_START
EFLPTOC1_START
EFLPTOC2_START
EFIPTOC1_START
EFHPTOC1_START
PDNSPTOC1_START
GUID-6BA9A7FE-D984-48C6-B8E2-704C4C38FA44 V1 EN
Figure 573: General start and operate signals
The operate signals from the protection functions are connected to the two trip logics
TRPPTRC1 and TRPPTRC2. The output of these trip logic functions is available at
binary output X100:PO3 and X100:PO4. The trip logic functions are provided with a
lockout and latching function, event generation and the trip signal duration setting. If
the lockout operation mode is selected, binary input X120:BI4 has been assigned to
RST_LKOUT input of both the trip logic to enable external reset with a push button.
Three other trip logics TRPPTRC3...4 are also available if the IED is ordered with
high speed binary outputs options.
1MRS756378 S Section 3
REF615 standard configurations
REF615 365
Application Manual