ABB UNITROL 1020 - Contents of this Manual

Chapter 1 - Introduction 
2 3BHS335648 E82 UNITROL 1020 User Manual
SM = Synchronous Machine
E = Exciter
PMG = Permanent Magnet Gen.
Generator or motor excitation with
PMG or external supply.
E
PMG
SM
1.3 Contents of this Manual
Chapter 1 - Introduction describes the contents of the User Manual and
provides the manufacturer’s information.
Chapter 2 - Safety Instructions explains the safety instruction levels and
provides general instructions on safety, which need to be strictly observed.
Chapter 3 - Device Overview outlines the description of the device,
operation modes, hardware capabilities and software features.
Chapter 4 - Installation and Storage provides information on environmental
conditions to be maintained during transportation and storage, information
on disposal and recycling of materials.
Chapter 5 - Commissioning provides information on preparing the device
for commissioning.
Chapter 6 - Operation describes the instructions how to operate the device.
Chapter 7 - Preventive Maintenance contains the maintenance schedule
and step-by-step instructions for specific maintenance tasks to be carried
out by the customer.
Chapter 8 - Troubleshooting provides instructions on how to proceed when
encountering problems.
Chapter 9 - Technical Data describes the technical data from the device,
ordering number and parameter list.