UNITROL 1020 User Manual 3BHS335648 E82 79
Chapter 4 - Installation and Storage
4.1 General
Chapter 4 – Installation and Storage provides all instructions for
installation and storage of the excitation system. It also contains
information on how to dispose of and recycle materials.
4.2 Safety Regulations
First read and understand the general safety instructions in Chapter
2 - Safety Instructions before starting to work with the excitation
system.
Converter components can be damaged while transporting the
excitation system.
4.3 Unpacking
The unit should be unpacked with the maximum care, without the use of
force and using suitable tools.
The unit should be inspected visually to check for any damage caused
during transport. Complaints regarding defects resulting from
inappropriate transport are to be addressed immediately to the receiving
station or the last carrier.
The unit is visibly damaged:
Safe operation is not possible.
The unit must not be installed and taken into operation.
To Next Page
Loading...
