Chapter 6 - Operation
162 3BHS335648 E82 UNITROL 1020 User Manual
6.4.9 Help Menu
Click Load File and select the appropriate
*.abb file.
Newest version as of release date of this
manual:
Then click Update. It is possible to update
the Target SW from USB or Ethernet
(faster).
In the following pop-up click Continue:
The update process is started and will take
around three minutes.
Download successful
The download succeeded successfully if
following pop-up appears:
Click Ok.
If the programming completed successfully, disconnect the USB cable and power cycle
the device.
Connect the CMT1000 to the device and double-check the loaded target software version
against the CMT1000.
In all other cases, the download has failed.
To Next Page
Loading...
