ABB UNITROL 1020 - Installing CMT1000 Software

Chapter 6 - Operation 
108 3BHS335648 E82 UNITROL 1020 User Manual
6.4.3 Installing CMT1000 Software
Distribution rights:
CMT1000 was developed with the Lab VIEW software and is distributed free of license
charges and costs. The copyright to Lab VIEW is owned by the company National
Instruments International Distribution (NIID).
“Copyright © [02-03-20] National Instruments Corporation.“
Put the CMT1000 CD in the CD-ROM drive.
Open the CD root directory
1 Driver Installation
Open CMT1000 Installer
Files\USB Driver.
Double-click
InstallUSBdriver.exe
The following Window appears
and disappears after a few
seconds.
Connect the device with the delivered USB cable to your PC. The window “New Hardware
Found” appears. Click Next until the device is installed.
2 CMT1000 Installation
Open C) CMT1000 Installer
Files and double-click
Setup.exe