UNITROL 1020 User Manual 3BHS335648 E82 5
Chapter 2 - Safety Instructions
2.1 General
Chapter 2 - Safety Instructions includes the safety instructions that must
be followed during installation, operation and maintenance of the
excitation system. Please read all instructions carefully before operating
the device and keep this manual for future reference.
2.2 Qualifications and Responsibilities
2.2.1 Qualifications and Responsibilities
Personnel involved in installation work and commissioning of the
UNITROL 1020 must be familiar, specially instructed and informed
about the residual danger areas according to the regulations currently in
force.
Operating personnel are not permitted to work at the control system.
Specially instructed personnel must only carry out maintenance and
repair work.
The maintenance personnel must be informed about the emergency
shutdown measures and must be capable of turning off the system in
case of emergency.
The maintenance personnel must be familiar with the accident
prevention measures at their workplace and must be instructed in first
aid and firefighting.
It is the owner’s responsibility to ensure that each person involved in the
installation and commissioning of the UNITROL 1020 has received the
appropriate training or instructions and has thoroughly read and clearly
understood the safety instructions in this chapter.
2.2.2 Consequences of Non-Compliance
Failure to comply with the safety instructions increases the risk of
electric shock and damage to the equipment. Third parties who
approach the installation are also at risk.
If the scheduled maintenance activities are performed only partially or
not at all, damage may occur with associated expensive repair costs.
To Next Page
Loading...
