abem Terrameter LS - Page 27

ABEM Terrameter LS
17
― Press <Ok>
If the edit text is numeric then the numerical keypad emulator (Figure 15) is shown otherwise the
alphanumerical keyboard emulator is shown (Figure 14)
• Navigating the emulators
― Press the arrow buttons (<Left> <Right> <Up> <Down>) to either move the
cursor within the edit text or to select an input key
• Deleting from the edit text in the alphanumerical keyboard emulator
― Press <Left> and/or <Right> to move the cursor to the right of the character(s)
to be deleted
― Press <Down> to move the cursor from the edit text to the input keys
― Press <Right> until the “<-“ input key is selected
This input key works as a backspace button on a traditional PC keyboard
― Press <Ok> once for every character to be deleted
• Resetting the edit text to “0” in the numerical keypad emulator
― Press <Down> to move the cursor from the edit text to the input keys
― Press <Right> until the “C“ input key is selected
― Press <Ok> and the number is replaced with a “0”
• Changing the edit text
― Press <Left> and/or <Right> to move the cursor to the correct place within the
edit text
― Press <Down> to move the cursor from the edit text to the input keys
― Navigate to the wanted input key
― Press <Ok>
• Substituting the edit text when the edit text is highlighted
― Press <Down> to move the cursor from the edit text to the input keys
― Navigate to the wanted input key
― Press <Ok> and the number or character will replace the edit text
• Saving the text
― Navigate to the input key at the bottom right (“Done!” or “OK”)
― Press <Ok>
• Canceling without saving