Setup wizard
17
Setup wizard
Setting up the system
The setup wizard guides you through the necessary ba-
sic system settings.
Note
All detailed settings can be found in the device
menu (see overview on page 30).
The language selection appears after switching on for the
first time:
1. Click the entry field and select the desired language
from the list. Click on Next to continue. The following
query appears:
• Click on “Next” to start the wizard.
Note
After the system is set up, you can uncheck the
box. The setup wizard is then no longer started
automatically.
Setting up the administrator
Warning
Note down the admin password.
The following password is preset
“1 2 3 4 5”
1. Click the entry field and enter your admin password.
2. To assign a new password, check the box next to
New Admin Password.
3. Enter the new password and confirm in the field be-
low.
4. Click on Next.
General Settings
1. Click on “Enter” in the next window.
2. Enter the system time (date and time). Click on Ap-
ply to accept the data. Exit the setting by pressing
OK, then click on Next.
To Next Page
Loading...
