Device menu
31
Manual Record
Note
Only active cameras can be selected for manual
recording.
The recording starts immediately.
1. Select the camera by checking the corresponding
box.
2. After a camera has been selected, the box changes
to ON.
3. Click “All” to select all cameras.
Note
Starting manual recording on the control panel:
• Select the camera.
• Press the REC key.
Video Search
Parameters for Video Search
“General” tab
IP
Overview of IP cameras
Used for searching the IP cameras
Video Type Continuous
Motion detection
Alarm
Motion detection or alarm
Motion detection and alarm
Manual recording
All
File Type Unlocked
Locked
All
Start Time Date and time
End Time Date and time
“Event” tab
Event Type Alarm input, motion detection
Start Time Date and time
End Time Date and time
IP Overview of IP cameras
Used for searching the IP cameras
Event Type Alarm input
Start Time Date and time
End Time Date and time
Alarm Input Selection of the triggered alarm input
To Next Page
Loading...
