Roche Diagnostics offers a wide range of infusion sets:
Common lengths of the tubing Filling volume with U100 insulin
30 cm / 12" 7 units
60 cm / 24" 10 units
80 cm / 31" 13 units
110 cm / 43" 18 units
See the sections 5.3.1 “Connect the cartridge, adapter and infusion set”,
5.4 “Prime the infusion set”, 5.5 “Prepare the infusion site”, 5.6 “Change
the infusion set” and 4 “Accessories, disposables and software” for
further information.
4.2 Adapter
The adapter physically connects the cartridge and the infusion set. It has
two seals and forms an efficient seal against water ingress for the
cartridge compartment of your insulin pump. The two small vents on the
adapter allow air pressure to equalize. The adapter only works correctly
when the vents are not plugged or dirty and when the seals are not worn
out or missing. The adapter should be replaced with at least every 10
th
cartridge change.
See the sections 5.3.1 “Connect the cartridge, adapter and infusion set”
and 5.8 “Change the adapter” for further information.
To Next Page
Loading...
Need help?
General
