7.5.1 Standard bolus
Your insulin pump offers you two possibilities to program a Standard
bolus:
“Quick” Standard bolus “Scroll” Standard bolus
Using the a and s keys of your Menu-guided using the d and f
insulin pump, with bolus increments keys with the a and s keys for
determined by the user. programming of the amount.
The bolus amount per delivery is limited to 25 units h of insulin.
Programming a Standard bolus includes a short start delay of 5 seconds
before the actual bolus delivery. If necessary, this allows you to cancel the
bolus before the bolus delivery has started by the press of the a or s
key. Alert A8: BOLUS CANCELLED will occur. Press f twice to confirm
and turn off the alert. See the section 10.1.8 “Alert A8: BOLUS
CANCELLED” for further information.
96
STANDARD user menu
To Next Page
Loading...
