Manually Raise/Lower, Cont.:
To Adjust Air Spring # 3:
Press the Program “ ” Button 5-Times;
the “ ” Arrow will ash 3-Times per second.
Then within 5 seconds press the “ ” Button
to ll or the “ ” Button to empty
Air Spring # 3.
To Adjust Air Spring # 4:
Press the Program “ ” Button 6-Times;
the “ ” Arrow will ash 4-Times per second.
Then within 5 seconds press the “ ” Button
to ll or the “ ” Button to empty
Air Spring # 4.
If you pass this 5 second window, simply start the
process over. When you get nished adjusting
one corner, you may increment to the next corner
by simply pressing the Program “ ” Button
1-Time within the 5 second window.
Setup Programming:
To Next Page
Loading...