Turning Ride-Height-On-Start ON/OFF:
Your system was shipped with Ride-Height-
On-Start enabled (ON). You may wish to dis-
able (OFF) or re-enable (ON) this feature. When
this feature is ON, the system will automatically
re-level the vehicle to Ride Height every time
that the IGN is switched ON. When this feature is
OFF, the system will remain at the last height the
vehicle was at when the IGN is switched ON.
To Turn Ride-Height-On-Start (ON)/(OFF):
First, turn the Ignition OFF. Then hold “ ”
while turning Ignition ON.
If this feature was previously ON, then it will be
turned OFF and the “ ” Arrow will light
momentarily.
If this feature was previously OFF, then it will be
turned ON and the “ ” Arrow will light
momentarily.
Setup Programming:
OFF
ON
IGN
OFF
ON
IGN
To Next Page
Loading...