AccuAir e-Level - Setup Programming: Saving Custom Height Presets; Saving a New Dump;Kneel Height; Saving a New Ride Height Preset; Saving a New Raise;Extra Clearance Height

Setup Programming:
Saving A New Raise/Extra Clearance Height:
Once you have manually adjusted each Air Springs to the height that you wish to save:
Hold the Program “ ” Button for approximately 3 seconds until both
the “ ” and “ ” Arrows ash; then Press the “ ” Button 3-Times to
save a New Raise/Extra Clearance Height.
Saving A New Ride Height:
Once you have manually adjusted each Air Springs to the height that you wish to save:
Hold the Program “ ” Button for approximately 3 seconds until both
the “ ” and “ ” Arrows ash; then Press the “ ” Button 2-Times to
save a New Ride Height.
Saving A New Dump/Kneel Height:
Once you have manually adjusted each Air Springs to the height that you wish to save:
Hold the Program “ ” Button for approximately 3 seconds until both
the “ ” and “ ” Arrows ash; then Press the “ ” Button 1-Time to
save a New Dump/Kneel Height.
The “ ” Arrow will ash 1-Time.
The “ ” Arrow will ash 2-Times.
The “ ” Arrow will ash 3-Times.
Program Button
+
+
+
Program Button
+
+
Program Button
+