AccuEnergy Acuvim II series User Manual

212
Series
b). Press “P” key or “E” key to move the cursor to "Setting". Press “V/A” key to go
to the meter parameter setting mode. Device address page is the rst page of
“Setting” mode. It shows the Modbus address of the device for several seconds,
and then the screen goes to Access Code page. Press “V/A” key to go to the
parameter setting page. Press “P” key or “E” key to move the cursor to "NET".
Press "V/A" key to go to the BACnet module setting page.
Fig 5-67
Fig 5-66

AccuEnergy Acuvim II series Specifications

General

Brand	AccuEnergy
Model	Acuvim II series
Category	Measuring Instruments
Language	English