AccuEnergy Acuvim II series User Manual

256
When number is 1, only AO following value range setting start point, AO
following value range setting end point, AO1 output range setting start point
and AO1 output range setting end point should be set.
When number is 2, only AO following value range setting start point, AO1
following value range setting point 2, AO following value range setting end
point, AO1 output range setting start point , AO1 output range setting point 2
and AO1 output range setting end point should be set.
When number is 3, only AO following value range setting start point, AO1
following value range setting point 2, AO1 following value range setting point 3
and AO following value range setting end point should be set. At the same time,
AO1 output range setting start point, AO1 output range setting point 2, AO1
output range setting point 3 and AO1 output range setting end point should be
set.
2) following value range setting:
AO following value range setting start point, AO1 following value range setting
point 2, AO1 following value range setting point 3 and AO following value range
setting end point are increasing value, while they should be within range of AO
following value. Otherwise, the function of AO will be aected.
Frequency: When selecting 50Hz or 60Hz type,frequency range is 45Hz ~
65Hz,real setting value is 4500 ~ 6500;
When selecting 400Hz type,frequency range is 300Hz ~ 500Hz,real setting value
is 30000~50000;.
Phase voltage V1, V2, V3 and average phase voltage: 0~480V, real setting value is
0~4800.
Line voltage V12, V23, V31 and average line voltage: 0~831V, real setting value is
0~8310.

AccuEnergy Acuvim II series Specifications

General

Brand	AccuEnergy
Model	Acuvim II series
Category	Measuring Instruments
Language	English