257
Current I1, I2, I3 and average current: 0~10A, real setting value is 0~10000
.
Power Pa, Pb and Pc: -4800~4800W, real setting value is -4800~4800
System power: -14400~14400W, real setting value is -14400~14400.
Reactive power Qa, Qb and Qc: -4800~4800 Var, real setting value is-4800~4800.
System reactive power: -14400~14400 Var.
Apparent power Sa, Sb and Sc: 0~4800VA, real setting value is 0~4800.
System apparent power: 0~14400VA, real setting value is 0~14400.
Power factor PFa, PFb, PFc and System power factor: -1~1, real setting value is
-1000~1000.
3) AO output range setting:
AO output value range setting start point, AO1 output value range setting point
2, AO1 output value range setting point 3 and AO output value range setting
end point are increasing value, while they should be within range of AO output
value.
When AO type is 0~20mA, the setting value range is 0~ 4915, and the
relationship is mA=setting value*20/4096.
When AO type is 4~20mA, the setting value range is 819~ 4915, and the
relationship is mA=setting value*20/4096.
When AO type is 0~5V, the setting value range is 0~ 4915, and the relationship
is V=setting value*5/4096.
When AO type is 1~5V, the setting value range is 819~ 4915, and the
relationship is V=setting value*5/4096.
To Next Page
Loading...
