AccuEnergy Acuvim II series - Page 326

318
0 in the Acuvim IIseries Power Meter. The relay must be operated with qualier
0X17, code 3, count 0, with 0 millisecond On and 1millisecond O. After sending
the request the current communication port will be changed to the Modbus
protocol only. The example will be shown in the Message Layout.
6.4.6 Error Reply
When meet the can’t recognize request , the unknown Object ,the unknown
variation ,the point unsupported , the unsupported function code , the
unsupported qualier ,the unsupported range , the buer overow or any other
exception error , an error reply will be generate from the Acuvim II series Power
Meter to send to the requester station . The Internal Indicator eld will reect
the type of error.
6.4.7 Prole
1) Device Function
Slave
2) Maximum Data Link Frame Size
Transmitted 292
Received 292
3) Maximum Application Fragment Size
Transmitted 2048
Received 2048
4) Transport Multi-Fragment
Supported