AccuEnergy Acuvim II series User Manual

55
If there is only one module connected, pressing E will have no eect.
Press V/A to select the module and enter the I/O module parameter setting
mode.
Key functions for setting the I/O module parameter:
Press H to return to I/O module selection mode.
The screen will roll to the next page each time P is pressed and will return to the
rst page when P is pressed at the last page.
The screen will roll to the last page each time E is pressed and will return to the
last page when E is pressed at the rst page.
Press V/A to modify the selected parameter.
Key functions for modifying the parameter:
Press H to move the ashing cursor to the next position.
Press P to increase the number by 1.
Press E to decrease the number by 1.
Press V/A to conrm the modication and return to parameter selection mode.
The following table shows the sequence:

AccuEnergy Acuvim II series Specifications

General

Brand	AccuEnergy
Model	Acuvim II series
Category	Measuring Instruments
Language	English