Machine Maintenance Procedures 3-11
Keyboard Removal 0
Prerequisite:
Battery Pack Removal
1. Press downward on the five (5) locking latches until the keyboard disengages and
separates from the system (Figure 3-6).
Figure 3-6. Keyboard Latches
2. Turn the keyboard over so that the keyboard (C) is face down on the palm rest
(Figure 3-7).
3. Disconnect keyboard FPC (A) from mainboard connector (B) (Figure 3-7).
Figure 3-7. Keyboard FPC
4. Remove the keyboard (C) from base assembly (Figure 3-7).
To Next Page
Loading...
