Machine Maintenance Procedures 3-17
4. Remove WLAN module from mainboard connector (D) (Figure 3-13).
Figure 3-13. WLAN Module
WLAN Module Installation 0
1. Place WLAN module into mainboard connector (D). Refer to Figure 3-13.
2. Install and secure one (1) screw (A) to the WLAN module (Figure 3-12).
3. Connect the antenna (C) to the WLAN card (Figure 3-12).
4. Install Base Door.
ID Size Quantity Screw Type
A M2.0*3.0 1
To Next Page
Loading...
