2-6 System Utilities
Main 0
The Main tab allows the user to set system time and date, enable or disable boot option
and enable or disable recovery.
Figure 2-2. BIOS Main
Table 2-2 describes the parameters shown in Figure 2-2.
Table 2-2. BIOS Main
Parameter Description Format/Option
System Time BIOS system time in 24-hour format Format: HH:MM:SS
(hour:minute:second)
System Date BIOS system date Format MM/DD/YYYY
(month/day/year)
Total Memory Total memory available N/A
Video Memory Available memory for video N/A
Graphic Mode Shows graphic mode options Option: Switchable or
Discrete
Quiet Boot Shows OEM (original equipment
manufacturer) screen during system boot
instead of traditional POST screen
Option: Enabled or
Disabled
Network Boot Option to boot system from LAN (local area
network)
Option: Enabled or
Disabled
System Time [01:44:01]
System Date
Total Memory
Graphic Mode
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
[03/16/2012]
6144 MB
[Switchable]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
Item Specific Help
This is the help for the hour
field. Valid range is from 0 to
23. REDUCE/INCREASE:
F5/F6.
3.7
Video Memory 1024 MB
Wake on LAN
SATA Mode [AHCI Mode]
[Enabled]
To Next Page
Loading...
