System Utilities 2-27
3. Boot from USB and excute
ZQS.bat
under DOS mode. (Figure 2-32)
Figure 2-32. UUID
4. At the command prompt, run
VEEPROM.EXE
to write any changes in the data to the
EEPROM.
Microsoft(R) Windows 98
(C)Copyright Microsoft Corp 1981-1999.
C:\
>
CD ZQS_U_V
C:\ZQS_U_V
>
ZQS
Write Data to EEPROM ( From [0h] to [9h] ) :
Please wait for progamming...
Compare Data with EEPROM ( From [0h] to [9h] ) :
Please wait for Comparing...
Write Data to EEPROM ( From [6h] to [6h] ) :
Please wait for progamming...
****
Enter the MAC ID -Sample:001636XXXXXX(_________)
To Next Page
Loading...
