Chapter 2 15
Miscellaneous
Parameter Description Option
AHCI Port 0/1/3 Displays the status of auto detection of the AHCI device.
Spread Spectrum If you enable spread spertrum, it can significantly reduce the EMI (Electro-
Magneticinterface) generated by the system and voltage according to its
temperature.
Enabled
Disabled
Bootup Num-lock Selects power on state for Num Lock. On
Off
USB Beep Message Enables or disables BIOS to display error beeps or messages during USB
device enumeration.
Enabled
Disabled
To Next Page
Loading...
