I-210+ User Manual 3
CHAPTER
2
P
RODUCT
D
ESCRIPTION
The I-210+ is a solid-state electricity meter designed to measure energy in
residential and commercial applications that are wired for single-phase ANSI form
1S, 2S, 3S, and 4S services. The I-210+n meter, the functional equivalent of the
I-210+,contains additional circuitry to support poly-phase residential (3-Wire Y
Network) applications wired for ANSI 12S and 25S meter forms. The I-210+ and
I-210+n are configured for single-voltage applications up to 240 V
RMS
.
The I-210+ product family is designed to work with a broad range of third-party
AMR / AMI systems encompassing all types of unidirectional and bi-directional
communications media. The modular meter design allows utilities to integrate a
range of AMR choices to suit each application’s requirement inside a standard
metering platform. The I-210+ and I-210+n are available with an internal
connect-disconnect relay option within the same meter height and form factor.
The I-210+c meter provides a wide range of features, including the following:
• An extended range of software configurable features softswitches expand the
functionality of the meter. (Please refer to Softswitches on page 25 for more
information.)
• Alphanumeric display
• Standardized meter reading (ANSI C12.18) and programming (ANSI
C12.19)
• Improved MeterMate™ support for the I-210+ expands shop configuration
of the meter operating and display parameters.
• A Programmable Transformer factor display item
• Separate accumulators for each detenting mode supports net metering
applications with different delivered and received energy pricing.
To Next Page
Loading...
