I-210+ User Manual 13
Chapter 3 • Operating Instructions
Billing Data Display
kWh Annunciator
This appears when the Billing Data Display is showing kWh.
Received / Delivered Annunciator
These indicators show whether the energy is being delivered to or received from the
premise.
Disk Analog Blocks
The indicators show the percentage of energy accumulated in comparison to the Kh value.
Volts/kW Annunciator
These indicators show whether the three-character display in the lower left of the LCD is
Volts or kilowatts.
The kWh energy value along with the kWh annunciator is displayed during normal
operation.
is displayed if the meter detects an error that could affect the metering
data.
The kWh will show an 8 for all characters, along with the kWh annunciator and the
minus sign to the left of the kWh display when the optional segment check is enabled.
is displayed if the meter is in firmware download mode.
is displayed if the meter is unconfigured. Meters in this state should be
returned to the factory for replacement.
To Next Page
Loading...
