22 I-210+ User Manual
Service
Service
The I-210+ meter is factory calibrated and requires no routine or scheduled service
by the user.
Repair
Factory repair or replacement service is offered when you cannot fix a problem.
Because of the high density and integrated design, the repair of on-board
components is not recommended. Instead, return the whole meter as described in
Returning Product on page 1.
Cleaning
• During cleaning, take care to avoid damaging or contaminating any
gold-plated contacts of the connectors.
• Do not immerse the meter in any liquid.
• Do not use abrasive cleaners on the polycarbonate covers.
• Do not use chlorinated hydrocarbon or ketone solvents on the covers
Storage
The I-210+ Meter is a durable device; however, temperature extremes (below -40C
or above +85C inside the meter cover) should be avoided.
To Next Page
Loading...
