HARDWARE INTERFACE PARAMETERS 7-1
SB1391 Hardware and Setup Guide - Document revision no. 1.14
7. HARDWARE INTERFACE PARAMETERS
This chapter summarizes ACSPL parameters relating to the hardware interface. The interface
itself is described in Section 4.4, "Control Connectors."
TABLE 7-1 Topics covered in this chapter
Topic Description
Serial communications Changing the baud rate and configuring multiple drop connections
CAN communications
(option)
Understanding the CAN switch and parameters
Hall sensors Using Hall inputs with the control module
Input and output ports Motion monitoring and other I/O functions
Further information
More detailed information about ACSPL is contained in the ACSPL Software
Guide
To Next Page
Loading...