PREFACE XIII
SB1391 Hardware and Setup Guide - Document revision no. 1.14
PREFACE
The SB1391 Hardware and Setup Guide describes how to mount, connect, tune, and operate the
SB1391 motion control module. Regarding operation, only an introduction to the ACS-Tech80,
programming language, ACSPL, is provided. For a detailed description of ACSPL, refer to the
ACSPL Software Guide.
The information in this guide is organized sequentially according to the steps involved in
installing and setting up the control module. An index is included.
Conventions
Visual cues are used in this guide in an attempt to make it easier to absorb the information.
Note
A note box is used for information of special interest or importance.
Caution
A caution box is used when an action must be done with care. Otherwise minor
equipment damage or loss of data could occur.
Warning
A warning box is used when an action must be done with great care.
Otherwise personal injury or significant equipment damage can occur.
ACSPL terms appearing in the text are presented in bold style.
ACSPL program fragments are presented in bold Courier New typeface.
To Next Page
Loading...
Need help?
General