ActionTec R3000 User Manual

5
Introduction
WPS Button
The WPS button activates WPS (WiFi Protected Setup) on the R3000. To use
WPS, press the WPS button on the R3000, then, within two minutes, press the
WPS button on a device you wish to connect to the R3000’s wireless network.
The device will automatically join the R3000’s wireless network. Repeat for other
wireless devices.
Rear Panel
The rear panel of the R3000 features 8 ports (Line, HPNA, LAN Ethernet, WAN
Ethernet, USB, and Power), as well as a Reset switches.
Line Port
The Line port is used to connect the R3000 to a telephone line connection.
HPNA Port
The HPNA port is used to connect the R3000 to an HPNA connection via
coaxial cable.

ActionTec R3000 Specifications

General

Brand	ActionTec
Model	R3000
Category	Wireless Router
Language	English