Acura 1994 Integra - Lnstallation

Timing
Belt
lnstallation
Install the timing belt
in
the
feverse order of
removal;
Only
key
points
are described
there.
NOTE: Clean the middle cover
and lower cover
before
installation.
1. Position the
crankshaft and the
camshaft
pulleys
as
shown betore
installing the
timing belt.
A.
Set
the crankshaft so
that the No.
1
piston
is at
top dead center
{TDC).
Align the
groove
on the
teeth side
of the timing belt
drive
pulley
to the
V
pointer
on the
oil
pump.
B.
Align the TDC marks on
intake and exhaust
pul-
leys.
2. Install the timing
belt tightly
in
the sequence
shown.
O
Timing belt drive
pulley
(crankshatt)
*
@
Adjusting
pulley
*
@
water
pump pulley
*
@
Exhaust camshaft
pulley
*
@
Intake camshaft
pul-
lev,
(cont'd)
6-51