Acura 1994 Integra - Synchro Sleeve, Synchro Hub; Inspection; Installation

SYNCHRO
HUB
Synchro
Sleeve, Synchro
Hub
Inspection
'1.
Inspect
gear
teeth
on all synchro
hubs and synchro
sleeves
for rounded off corners,
which
indicates
wear.
2. Install each synchro
hub in its mating synchro
sleeve and check
for Jrgedom of
movement.
NOTE:
lf replacement
is required, always
replace
the synchro
sleeve and synchro
hub as a set.
Installation
When assembling the
synchro sleeve and synchro
hub,
be sure to
match the thr€e sets of
longer testh
(120
degrees
apart) on the synchro
sleeve with the three sots
of deeper
grooves
in th€ synchro
hub.
CAUTION:
Do not
install thc synchro 3l.6yc
with itt
longor tosth in tha
13t/2nd synchro hub 3lob,
b.c!u3a
it will d.mago tho
spring ring.
sYt{cHRo
HUB
SLOT
13-34
LONGER
TEETH
SLEEVE