−−Each preset button can
store one frequency on AM and two
frequencies on FM.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
that preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
,pressthe
A. SEL (auto select) button. This
restores the presets you originally
set.
Press the A. SEL button. ‘‘A-SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
For information on FM/AM radio
frequencies and reception, see page
.
If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Usethetune,skip,scan,orRDS
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
1.
2.
3.
4.
284
To turn off auto select
Preset AUTO SELECT
Playing the FM/AM Radio (Models without navigation system)
178
To Next Page
Loading...
Need help?
General
