▲▼
All the maintenance items displayed
in the multi-information display are
in code.
For an explanation of the
maintenance codes, see page .
Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the display the
next time you turn the ignition
switch to the ON (II) position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
Turn the ignition switch to the ON
(II) position.
If the engine oil life is not
displayed, press the SEL/RESET
buttononthesteeringwheel
repeatedly.
Press and hold the SEL/RESET
button on the steering wheel for
more than 10 seconds. The
remaining engine oil life reset
modewillbeshownonthemulti-
information display.
1.
2.
3.
411
Maintenance Main Items and Sub
Items
Resetting the Engine Oil Life
Display
Maintenance Minder
408
MAINTENANCE
MAIN ITEM
ENGINE OIL LIFE
DISPLAY
MESSAGE
DISPLAY
SEL/RESET BUTTON
INFO BUTTONS ( / )
MAINTENANCE
SUB ITEMS
To Next Page
Loading...
Need help?
General
