Acura 2010 TSX User Manual

The instrument panel has many
indicators to give you important
information about your vehicle.
If your front passenger does not
fasten their seat belt, the indicator
comes on about 6 seconds after the
ignition switch is turned to the ON
(II) position.
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passengers to fasten your seat belts.
A beeper also sounds if you have not
fastened your seat belt.
You will also see a ‘‘FASTEN SEAT
BELT’’ message on the multi-
information display.
If you turn the ignition switch to the
ON (II) position before fastening
your seat belt, the beeper sounds
and the indicator flashes. If you do
notfastenyourseatbeltbeforethe
beeper stops, the indicator stops
flashing but remains on.
You will also see a ‘‘CHECK
EMISSION SYSTEM’’ message on
the multi-information display. For
more information, see page .
If either of you do not fasten your
seat belt while driving, the beeper
will sound and the indicator will flash
again at regular intervals, and you
will see a ‘‘FASTEN SEAT BELT’’ or
‘‘FASTEN PASSENGER SEAT
BELT’’ message on the multi-
information display. For more
information, see page .
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running, and you
will see a ‘‘CHECK ENGINE OIL
LEVEL’’ message on the multi-
information display. For more
information, see page .
19
471
472
Instrument Panel Indicators
Seat Belt Reminder
Indicator
Malfunction Indicator
Lamp
Low Oil Pressure
Indicator
60
2010 TSX

Acura 2010 TSX Specifications

General

Brand	Acura
Model	2010 TSX
Category	Automobile
Language	English