EasyManuals Logo

Acura 2010 TSX User Manual

Acura 2010 TSX
524 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #446 background imageLoading...
Page #446 background image
To replace a wiper blade: Disconnect the blade assembly
from the wiper arm:
Raise each wiper arm off the
windshield, lifting the driver’s side
first, then the passengers side.
Check the condition of the wiper
blades at least every six months.
Replace them if you find signs of
cracking in the rubber, areas that are
getting hard, or if they leave streaks
and unwiped areas when used.
Put a cloth on the edge of the
lock tab to prevent scratches,
then push up on the lock tab
carefully with a flat-tip
screwdriver.
2.
1.
CONTINUED
Wiper Blades
Maintenance
443
WIPER BLADES
LOCK TAB
Do not open the hood when the wiper
arms are raised, or you will damage the
hood and wiper arms.
2010 TSX

Table of Contents

Other manuals for Acura 2010 TSX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acura 2010 TSX and is the answer not in the manual?

Acura 2010 TSX Specifications

General IconGeneral
BrandAcura
Model2010 TSX
CategoryAutomobile
LanguageEnglish

Related product manuals