▲▼
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
the total distance traveled after the
remaining oil life became 0%, and the
maintenance item code(s).
Immediately have the service
performed, and make sure to reset
the display as described on page .
Pressing either INFO button ( / )
switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.
When you press the SEL/RESET
button to select the engine oil life,
the message ‘‘SERVICE,’’ along with
the maintenance item code(s) and
the total negative distance traveled
after the oil life became 0%, will be
displayed on the multi-information
display.
This message is displayed again
when you drive over 10 miles (for
U.S. models) or 10 km (for Canadian
models) after seeing the 0% message.
408
Maintenance Minder
Maintenance
407
CANADAU.S.
MAINTENANCE ITEM CODE(S)
U.S. CANADA
TOTAL PAST DUE DISTANCE
TRAVELED
TOTAL PAST DUE DISTANCE
TRAVELED
To Next Page
Loading...
Need help?
General
