+
+
−
The numbers in the illustration show
you the order to connect the jumper
cables.
Connect one jumper cable to the
positive ( ) terminal on your
battery. Connect the other end to
the positive ( ) terminal on the
booster battery.
Connect the second jumper cable
to the negative ( ) terminal on
the booster battery. Connect the
other end to the engine mounting
bolt (automatic) or the
transmission mounting bolt
(manual),asshown.Donot
connect this jumper cable to any
other part of the engine.
4. 5.
CONTINUED
4-cylinder models
Jump Starting
Taking Care of the Unexpected
467
BOOSTER BATTERY
BOOSTER BATTERY
4-cylinder models 6-cylinder models
4-cylinder models with automatic
transmission