STEMMA QTconnector for I2C devices, with switchable power, so you can go
into low power mode.
On/Charge/UserLEDs + statusNeoPixelwith pin-controlled power for low power
usage.
Low Power friendly! In deep sleep mode, we can get down to 80~100uA of
current draw from the Lipoly connection. Quiescent current is from the power
regulator, ESP32-S2 chip, and Lipoly monitor. Turn off the NeoPixel and external
I2C/TFT power for the lowest quiescent current draw.
Works with Arduino or CircuitPython
Pinouts
•
•
•
•
©Adafruit Industries Page 13 of 263
To Next Page
Loading...
