If you have multiple boards you want to support, say ESP8266 and Adafruit, have
both URLs in the text box separated by a comma (,)
Once done clickOKto save the new preference settings.
The next step is to actually install the Board Support Package (BSP). Go to the Tools →
Board → Board Managersubmenu. A dialog should come up with various BSPs.
Search for esp32.
Click the Install button and wait for it to finish. Once it is finished, you can close the
dialog.
In the Tools → Board submenu you should see ESP32 Arduino and in that dropdown it
should contain the ESP32 boards along with all the latest ESP32-S2/S3 boards.
Look for the board called Adafruit Feather ESP32-S3 TFT.
©Adafruit Industries Page 191 of 263
To Next Page
Loading...
Need help?
General
