WipperSnapper Setup
What is WipperSnapper
WipperSnapper is a firmware designed to turn any WiFi-capable board into an
Internet-of-Things device without programming a single line of code. WipperSnapper
connects to Adafruit IO(), a webplatform designed (by Adafruit!())
todisplay,respond, andinteractwith your project's data.
Simply load the WipperSnapper firmware onto your board, add credentials, and plug it
into power. Your board will automatically register itself with your Adafruit IO account.
From there, you can addcomponentsto your board such as buttons, switches,
potentiometers, sensors, and more! Components aredynamicallyadded to hardware,
so you canimmediately start interacting, logging, and streaming the data your
projects produce without writing code.
The WipperSnapper firmware and ecosystem are inBETAand are actively being
developed to add functionality, more boards, more sensors, and fix bugs. We
encourage you to try out WipperSnapperwith the understanding that it is not
final release software and is still in development.
If you encounter any bugs, glitches, or difficulties during the beta period, or with
this guide,please contact us via http://io.adafruit.com/support
©Adafruit Industries Page 230 of 263
To Next Page
Loading...
Need help?
General
