ADE Accenta G3 Engineering Information

Alarm and Walk tests
The alarm test function allows you to test the
Strobe, Bell, Low and high volume sounders of
the system.
The walk test function allows each detector to be
checked in order to verify that they are
functioning correctly.
16 4PI175 issue 1_6/01
Engineering information Accenta/Optima G3 Intruder system
Alarm and Walk tests
Alarm test
1
Attack
x1 for zone 1
x2 for zone 2
|
x4 for zone 4
flat x1 for zone 5
flat x2 for zone 6
|
flat x4 for zone 8
Rapid for PA
Rapid for Tamper
Zones
Strobe
Strobe test
2
Bell test
3
Low volume
sounder
High volume
sounder
4
5
Walk test
6
Strobe On
Bell on
internal low
volume sound
internal high
volume sound
Strobe On
Day
Day
Day
Day
Day
OFF
0
Day
Exit current level
Leave engineer mode
Day
Tamper
Attack
Acknowledge
Appropriate zone lights
are lit(latched)
Attack
Tamper
Press zero to turn off
options 2,3,4 and 5
before selecting a new one
Enter Engineer program mode
Reset
Reset
Example: To start bell test and thereafter to stop bell test.
3
Prog
9 9 9 9
0
Reset
1
Reset

ADE Accenta G3 Specifications

General

Brand	ADE
Model	Accenta G3
Category	Security System
Language	English