CHAPTER 1
30
Looking at the Work Area
To restore the default library or replace the currently
displayed libraries:
Click the More button , and choose a
command from the pop-up menu:
• Reset to restore the default library for that type.
• Replace to replace the current library with the
contents of another library.
To save a subset of a library:
1 Shift-click to select multiple presets. Only the
selected presets will be saved to the new library.
2 Click Save Set, then enter a name for the library.
If you want to save the library to a folder other
than the default, navigate to the new folder before
saving.
To rename a preset:
1 Do one of the following:
• Select a preset in the list, and click Rename.
• Double-click a preset in the list.
2 Enter a new name for the preset. If you selected
multiple presets, you will be prompted to enter
multiple names.
To delete a preset:
Select the preset you want to delete, and
click Delete.
To change the display of presets in the Preset
Manager:
Click the More button , and choose a
display mode from the middle section of the
pop-up menu:
• Te xt Only to display the name of each
preset item.
• Small Thumbnail or Large Thumbnail to
display a thumbnail of each preset item.
• Small List or Large List to display the name and
thumbnail of each preset item.
• Stroke Thumbnail to display a sample brush
stroke and brush thumbnail of each brush
preset. (This option is available for brush
presets only.)
To Next Page
Loading...